CPCCLSF2001A - Licence to erect, alter and dismantle scaffolding basic levelCPCCLSF2001ALicence to erect, alter and dismantle scaffolding basic level

Unit descriptor

This unit specifies the outcomes required to erect, alter and dismantle scaffolding at the basic level, consisting of scaffolding work connected with the operation or use of modular or pre-fabricated scaffolds, cantilevered materials hoists with a maximum working load of 500kg, ropes and gin wheels, safety nets and static lines, and bracket scaffolds (tank and formwork) for licensing purposes.

Application of the unit

This unit covers the scope of work to plan the job, select and inspect equipment, set up task, erect scaffold and scaffold equipment and dismantle scaffold and scaffold equipment.

This unit is based upon the National Standard for Licensing Persons Performing High Risk Work.

This unit in its current form it state and territory licensing requirements. Any alteration will result in a unit which is not acceptable to regulators for the purpose of licensing.

Prerequisite units

Nil

Employability skills

This unit contains employability skills.

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

EVIDENCE GUIDE

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Successful assessment of this unit meets the competency requirement of the National Standard for licensing Persons Performing High Risk Work.

State/Territory OHS regulators have mandated the use of Assessment Instruments and Instructions for Assessment endorsed by the national body responsible for OHS matters for the assessment of this unit.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

A person who demonstrates competency in this unit must be able to provide evidence of the ability to:

comply with OHS licensing requirements.

effectively communicate and work safely with others in the work area.

effectively apply risk assessment and hazard management procedures at a basic scaffolder level.

effectively complete the planning, erection and dismantling of a scaffolding system, in accordance with procedures, including a minimum of erect and dismantle:

Modular Scaffold with return and ladder access and platform brackets (hop-up brackets)

Bracket Scaffold

Mobile Scaffold

gin wheel

Cantilever Hoist

safety net and static line

safety screen

Scaffold to be of a minimum height of at least 5.0 metres above the supporting surface with full edge protection (includes safety screen) for each work platform including toe boards and handrails.

correctly demonstrate fibre rope bends and hitches.

effectively conduct pre and post operational checks of basic scaffolding.

complete handover certificate as required.

Context of and specific resources for assessment

Assessment of the safe and effective application of knowledge and skill to workplace tasks (performance) must be undertaken using the National OHS endorsed Assessment Instrument

Assessment of performance must be undertaken either in the workplace or in a realistically simulated workplace setting

.Assessors must ensure that the assessment in the workplace is organised to ensure that all the required equipment and materials and a suitable working area is made available to suit the assessment and the workplace

Assessment must occur under standard and authorised work practices, safety requirements and environmental constraints for basic scaffolding

Applicants must have access to:

personal protective equipment (PPE) for the purpose of the Performance Assessment

appropriate safety equipment in safe condition

appropriate scaffolding and associated scaffolding equipment

communication equipment (e.g. fixed channel two way radios) where applicable

appropriate personnel to assist with the erecting and dismantling of scaffold and scaffold equipment.

Method of assessment

Assessment must be conducted using the national OHS endorsed Assessment Instruments. These Instruments provide advice on their application.

Assessment may be in conjunction with the assessment of other units of competency.

The use of 'simulators' in the assessment of this unit of competency is not acceptable.

Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge.

Assessment must confirm a reasonable inference that competency is not only able to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.

Guidance information for assessment

Further information about endorsed Assessment Instruments may be obtained from state/territory OHS regulators.

RANGE STATEMENT

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Hazards may include but not limited to:

ground conditions (e.g. ground bearing pressure/s, back filled trenches, underground services, slopes)

overhead hazards (e.g. power lines, service pipes) (minimum clearance distance from powerlines or electrical equipment as determined by relevant state authority or electrical supply authority)

traffic (e.g. pedestrians, vehicles, other plant)

insufficient lighting

environmental conditions (e.g. wind, lightning, storms)

other site specific hazards (e.g. hazardous materials).

Hazard control measures:

Refers to the systematic process of eliminating or reducing the risk to personnel and property through the application of controls.

It includes the application of the hierarchy of control, the six-step preference of control measures to manage and control risk:

elimination

substitution

isolation

engineering control measures

using safe work practices

personal protective equipment.

Appropriate standards may include:

codes of practice

legislation

Australian Standards

manufacturer's specifications

industry standards (where applicable).

Site Information may include, but not be limited to:

local conditions such as access and egress

work method statements

site-specific job safety analyses and other documentation as required

task plans.

Scaffold may include but not limited to:

mobile scaffolding

bracket scaffolding

modular scaffolding, including:

steel

fibreglass and

aluminium frame scaffolding

prefabricated scaffolding.

Associated equipment may include but not limited to:

planks

flexible steel wire rope and fittings.

NB: including identification, uses and connections which may include termination for static lines and guys for cantilever hoists.

ladders

tie tubes and fittings

fibre rope

NB: including identification and uses (natural and synthetic), and connections associated with bends and hitches.

stairways and screening

hand tools, including, but not limited to:

box spanners

hammers

spirit levels

tape measures

scaffold belts

podgers

hammers

wire nips

wrenches

torpedo levels

shovels

spanners

cutters

hammer drills

sledge hammers

wheel barrows and

relevant maintenance equipment.

Scaffolding equipment may include but not limited to:

materials hoists

gin wheels

safety nets

static lines and fittings.

Appropriate personnel may include, but are not limited to:

supervisors

colleagues

managers who are authorised to take responsibility for the workplace or operations

other scaffolders

other site personnel as applicable.

Safety equipment may include but not limited to:

safety harness

energy absorber

lanyard

inertia reel.

Forces and Loads may include, but are not limited to:

dead loads

live loads

static load

dynamic loads

wind loads.

Communication Methods may include but not limited to:

verbal and non-verbal language

written instructions

signage

communication signals

listening

questioning to confirm understanding, and appropriate worksite protocol.

Procedures may include but not limited to:

manufacturer's guidelines (instructions, specifications or checklists)

industry operating procedures, relevant codes of practice

workplace procedures (work instructions, operating procedures, checklists)

reporting and recording procedures such as e.g. equipment defect/s.

Communication equipment may include but is not limited to:

fixed frequency two way radios

mobile phones.

Hazard prevention/control measures may include but not limited to:

safety tags on electrical switches/isolators

safety observer used inside exclusion zone (e.g. Spotter), to include the use of power line warning systems (e.g. Tiger tails)

power disconnected by competent authority where applicable

traffic and pedestrian barricades and controls

safe and adequate access / egress is established

personal protective equipment

adequate illumination.

Ground suitability may include but not limited to:

rough uneven ground

backfilled ground

soft soils

hard compacted soil

rock

bitumen

concrete.

Stability may include but is not limited to:

ground bearing pressure

sole plates/boards

screw jacks

levelling

ties/guys.

Unit sector

Construction

Co-requisite units

Nil